GIGABYTE B650E AORUS MASTER Motherboard

GIGABYTE B650E AORUS MASTER Motherboard

• CPU

  1. AMD Socket AM5, support for: AMD Ryzen 7000/ Ryzen 8000 Series Processors

  (Please refer "CPU Support List" for more information.)

• Chipset

  1. AMD B650

• Memory

  Support for DDR5 8000(OC)/ 7800(OC)/ 7600(OC)/ 7200(OC)/ 7000(OC)/ 6800(OC)/ 6666(OC)/ 6600(OC)/ 6400(OC)/ 6200(OC)/ 6000(OC)/ 5600(OC)/ 5200/ 4800/ 4400 MT/s memory modules

  1. 4 x DDR5 DIMM sockets supporting up to 192 GB (48 GB single DIMM capacity) of system memory

  1. Dual channel memory architecture

  1. Support for non-ECC Un-buffered DIMM 1Rx8/2Rx8/1Rx16 memory modules

  Support for AMD EXtended Profiles for Overclocking (AMD EXPO) and Extreme Memory Profile (XMP) memory modules

  (The CPU and memory configuration may affect the supported memory types, data rate (speed), and number of DRAM modules, please refer to "Memory Support List" for more information.)

• Onboard Graphics

  Integrated Graphics Processor with AMD Radeon Graphics support:

  1. 1 x HDMI port, supporting a maximum resolution of 7680x4320@60 Hz

     * Support for HDMI 2.1 version, HDCP 2.3, and HDR.

     ** Support native HDMI 2.1 TMDS compatible ports.

  (Graphics specifications may vary depending on CPU support.)

• Audio

  1. Realtek ALC1220-VB CODEC

     * The front panel line out jack supports DSD audio.

  2. ESS ES9118 DAC chip

  3. Support for DTS:X Ultra

  4. High Definition Audio

  5. 2/4/5.1-channel

     * You can change the functionality of an audio jack using the audio software. To configure 5.1-channel audio, access the audio software for audio settings.

  6. Support for S/PDIF Out

• LAN

  1. Intel 2.5GbE LAN chip (2.5 Gbps/1 Gbps/100 Mbps)

• Wireless Communication module

  AMD Wi-Fi 6E RZ616 (MT7922A22M)

  1. WIFI a, b, g, n, ac, ax, supporting 2.4/5/6 GHz carrier frequency bands

  1. BLUETOOTH 5.2

  1. Support for 11ax 160MHz wireless standard

  (Actual data rate may vary depending on environment and equipment.)

• Expansion Slots

  1 x PCI Express x16 slot (PCIEX16), integrated in the CPU:

  1. AMD Ryzen 7000 Series Processors support PCIe 5.0 x16 mode* The M2B_CPU and M2C_CPU connectors share bandwidth with the PCIEX16 slot. When the M2B_CPU or M2C_CPU connectors is populated, the PCIEX16 slot operates at up to x8 mode.

  2. AMD Ryzen 8000 Series-Phoenix 1 Processors support PCIe 4.0 x8 mode

  1. AMD Ryzen 8000 Series-Phoenix 2 Processors support PCIe 4.0 x4 mode

  (The PCIEX16 slot can only support a graphics card or an NVMe SSD. If only one graphics card is to be installed, be sure to install it in the PCIEX16 slot.)

• 
  

  Chipset:

  1. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x4 (PCIEX4)

  2. 1 x PCI Express x16 slot, supporting PCIe 4.0 and running at x2 (PCIEX2)

• Storage Interface

  1 x M.2 connector (M2A_CPU), integrated in the CPU, supporting Socket 3, M key, type 25110/22110/2580/2280 SSDs:

  1. AMD Ryzen 7000 Series Processors support PCIe 5.0 x4/x2 SSDs

  2. AMD Ryzen 8000 Series-Phoenix 1 Processors support PCIe 4.0 x4/x2 SSDs

  3. AMD Ryzen 8000 Series-Phoenix 2 Processors support PCIe 4.0 x2 SSDs

  2 x M.2 connectors (M2B_CPU/M2C_CPU), integrated in the CPU, supporting Socket 3,M key, type 22110/2280 SSDs:

  1. AMD Ryzen 7000 Series Processors support PCIe 5.0 x4/x2 SSDs

     * The M2B_CPU and M2C_CPU connectors will become unavailable when using the AMD Ryzen 8000 Series-Phoenix 1/Phoenix 2 Processors.

  1 x M.2 connector (M2D_CPU), integrated in the CPU, supporting Socket 3, M key, type 22110/2280 SSDs:

  1. AMD Ryzen 7000 Series Processors support PCIe 5.0 x4/x2 SSDs

  2. AMD Ryzen 8000 Series-Phoenix 1 Processors support PCIe 4.0 x4/x2 SSDs

  3. AMD Ryzen 8000 Series-Phoenix 2 Processors support PCIe 4.0 x4/x2 SSDs

  4 x SATA 6Gb/s connectors

  RAID 0, RAID 1, and RAID 10 support for NVMe SSD storage devices

  RAID 0, RAID 1, and RAID 10 support for SATA storage devices

• USB

  CPU:

  1. 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2 support

  2. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

  CPU+USB 3.2 Gen 1 Hub:

  1. 4 x USB 3.2 Gen 1 ports on the back panel

  CPU + USB 2.0 Hub:

  1. 4 x USB 2.0/1.1 ports on the back panel

  Chipset:

  1. 1 x USB Type-C port with USB 3.2 Gen 2x2 support, available through the internal USB header

  2. 2 x USB 3.2 Gen 2 Type-A ports (red) on the back panel

  3. 2 x USB 3.2 Gen 1 ports available through the internal USB header

  4. 4 x USB 2.0/1.1 ports available through the internal USB headers

• Internal I/O Connectors

  1. 1 x 24-pin ATX main power connector

  2. 2 x 8-pin ATX 12V power connectors

  3. 1 x CPU fan header

  4. 1 x CPU fan/water cooling pump header

  5. 4 x system fan headers

  6. 4 x system fan/water cooling pump headers

  7. 2 x addressable LED strip headers

  8. 2 x RGB LED strip headers

  9. 1 x CPU cooler LED strip/RGB LED strip header

  10. 4 x M.2 Socket 3 connectors

  11. 4 x SATA 6Gb/s connectors

  12. 1 x front panel header

  13. 1 x front panel audio header

  14. 1 x USB Type-C header, with USB 3.2 Gen 2x2 support

  15. 1 x USB 3.2 Gen 1 header

  16. 2 x USB 2.0/1.1 headers

  17. 1 x noise detection header

  18. 1 x THB_U4 add-in card connector

  19. 1 x Trusted Platform Module header (For the GC-TPM2.0 SPI/GC-TPM2.0 SPI 2.0/ GC-TPM2.0 SPI V2 module only)

  20. 1 x power button

  21. 1 x reset button

  22. 2 x temperature sensor headers

  23. 1 x reset jumper

  24. 1 x Clear CMOS jumper

• Back Panel Connectors

  1. 1 x Q-Flash Plus button

  2. 1 x Clear CMOS button

  3. 1 x HDMI 2.1 port

  4. 2 x SMA antenna connectors (2T2R)

  5. 1 x USB Type-C port on the back panel, with USB 3.2 Gen 2 support

  6. 4 x USB 3.2 Gen 2 Type-A ports (red)

  7. 4 x USB 3.2 Gen 1 ports

  8. 4 x USB 2.0/1.1 ports

  9. 1 x RJ-45 port

  10. 1 x optical S/PDIF Out connector

  11. 2 x audio jacks

• I/O Controller

  1. iTE I/O Controller Chip

• H/W Monitoring

  1. Voltage detection

  2. Temperature detection

  3. Fan speed detection

  4. Water cooling flow rate detection

  5. Fan fail warning

  6. Fan speed control

     * Whether the fan (pump) speed control function is supported will depend on the fan (pump) you install.

  7. Noise detection

• BIOS

  1. 1 x 256 Mbit flash

  2. Use of licensed AMI UEFI BIOS

  3. PnP 1.0a, DMI 2.7, WfM 2.0, SM BIOS 2.7, ACPI 5.0

• Unique Features

  1. Support for GIGABYTE Control Center (GCC)

     * Available applications in GCC may vary by motherboard model. Supported functions of each application may also vary depending on motherboard specifications.

  2. Support for Q-Flash

  3. Support for Q-Flash Plus

• Bundled Software

  1. Norton Internet Security (OEM version)

  2. LAN bandwidth management software

• Operating System

  1. Support for Windows 11 64-bit

  2. Support for Windows 10 64-bit

• Form Factor

  1. ATX Form Factor; 30.5cm x 24.4cm